General information, not medical advice. Sea moss contains iodine. Ask your GP before use if you have a thyroid condition, take medication, or are pregnant or breastfeeding. Quality & Testing.
## Introduction: Is sea moss regulated for heavy metals in Australia?
Australian consumers purchasing sea moss often assume a clear, dedicated regulatory framework exists for heavy metal contamination in seaweed products. The reality is more nuanced. While Food Standards Australia New Zealand (FSANZ) does set certain maximum levels for contaminants in food through Standard 1.4.1 and its companion Schedule 19, dried seaweed does not occupy a comprehensive, dedicated row across all heavy metal categories (FSANZ, 2025a).
This matters because sea moss, like all marine macroalgae, is a bioaccumulator. It absorbs elements from surrounding seawater non-selectively, concentrating not only beneficial minerals like iodine, magnesium, and potassium, but also potentially toxic heavy metals including lead, cadmium, mercury, and arsenic (Dujardin et al., 2023). The question is not whether sea moss contains these elements. It does. The question is what specific legal limits apply, where the regulatory gaps are, and what a consumer or retailer can do to fill them.
This article decodes the actual regulatory landscape under Australian food law, compares it with the EU and Codex Alimentarius frameworks, and explains why third-party testing beyond minimum compliance is the consumer's real protection.
## What FSANZ Standard 1.4.1 actually covers
Standard 1.4.1 (Contaminants and Natural Toxicants) is the primary instrument within the Australia New Zealand Food Standards Code that establishes maximum levels (MLs) for contaminants in food. The specific numerical limits are detailed in Schedule 19, which sets maximum levels for five metal contaminants: arsenic, cadmium, lead, mercury, and tin (FSANZ, 2025a).
### Where seaweed appears in Schedule 19
Seaweed has a dedicated entry for one contaminant only:
| Contaminant | Seaweed-specific limit in Schedule 19 | General food category limits (for context) |
| --- | --- | --- |
| Inorganic arsenic | 1.0 mg/kg | Crustacea/fish: 2.0 mg/kg; cereals: 1.0 mg/kg (total) |
| Lead | No seaweed-specific row | Fruit/vegetables: 0.1 mg/kg; molluscs: 2.0 mg/kg |
| Cadmium | No seaweed-specific row | Leafy vegetables: 0.1 mg/kg; molluscs: 2.0 mg/kg |
| Mercury | No seaweed-specific row | Fish species-dependent; salt: 0.1 mg/kg |
| Tin | No seaweed-specific row | Canned foods: 250 mg/kg |
> The Australian New Zealand Food Standards Code sets a maximum level of 1.0 mg/kg for inorganic arsenic in seaweed. Most seaweed samples tested in FSANZ surveys fell below this threshold, with the exception of one composite hijiki sample.
> -- FSANZ (2025b), Survey of Inorganic Arsenic in Seaweed.
This means the only heavy metal with a published, seaweed-specific numerical limit in Australian food law is inorganic arsenic. For lead, cadmium, and mercury, dried seaweed does not have its own row in Schedule 19.
### The "safe and suitable" backstop
When no specific maximum level exists for a food-contaminant combination, the Food Standards Code does not leave a vacuum. The Code's general provisions require that all food sold in Australia must be "safe and suitable" for human consumption. This places the compliance burden on the food manufacturer or importer to demonstrate that their product does not pose a risk to public health, even in the absence of a numerical ceiling (FSANZ, 2025c).
In practice, this means a sea moss retailer cannot argue "there is no limit, therefore any level is acceptable." The general obligation requires evidence of safety, which for a known bioaccumulator means testing.
## How imported seaweed is screened at the border
Australia's Imported Food Inspection Scheme (IFIS), administered by the Department of Agriculture, Fisheries and Forestry (DAFF), uses risk-based border inspection. FSANZ provides DAFF with risk assessments identifying which foods pose medium or high risks, determining which products receive regular inspection (FSANZ, 2025d).
Two seaweed categories currently appear on the risk food list:
- **Brown seaweed** (*Phaeophyceae* class): Classified as medium-to-high risk for **iodine** (assessed March 2016)
- **Hijiki seaweed**: Classified as medium-to-high risk for **inorganic arsenic** (assessed June 2016)
### What the border does and does not test
- [x] Brown seaweed consignments: 100% tested for iodine
- [x] Hijiki seaweed consignments: 100% tested for inorganic arsenic
- [ ] Red seaweed (including *Chondrus crispus*): not on the risk food list
- [ ] Dried sea moss gel products: not on the risk food list
- [ ] Lead, cadmium, or mercury in any seaweed: not routinely tested at the border
This means a shipment of dried *Chondrus crispus* (the species sold as Irish sea moss) can enter Australia without mandatory border testing for any heavy metal. The compliance responsibility falls entirely on the importer and retailer under the general "safe and suitable" obligation (FSANZ, 2025d).
## The iodine regulatory gap
Iodine presents a unique regulatory challenge. Despite being the most acutely dangerous substance in sea moss from a dosing perspective, iodine is not classified as a contaminant under Standard 1.4.1. It is regulated as a nutrient, not a toxicant (FSANZ, 2025d).
This classification creates a structural gap:
```
Contaminant pathway (Standard 1.4.1)
Lead, Cadmium, Mercury, Arsenic → Schedule 19 MLs
Iodine → NOT listed here
Nutrient pathway
Iodine → Tolerable Upper Intake Level (UL) = 1,100 mcg/day (adults)
→ No maximum concentration limit in raw seaweed products
```
Brown seaweed is tested for iodine at the border because FSANZ classified it as a risk food. But non-brown seaweed species, including *Chondrus crispus*, are not on the risk food list despite containing variable iodine concentrations. A single 10 g serving of dried *Chondrus crispus* can deliver iodine levels that approach or exceed the 1,100 mcg/day tolerable upper intake level, depending on the batch and harvest location (Dujardin et al., 2023).
For iodine quantification per lot, ICP-MS analysis remains the only reliable method. Our Certificate of Analysis (COA) workflow reports iodine in mcg/g per lot so consumers can calculate their daily intake against the UL. For more on how to interpret these results, see [Reading a COA Line by Line](/blogs/learn/resources/reading-a-coa-line-by-line).
## How the EU compares: Regulation 2023/915
The European Union has moved substantially further than Australia in establishing seaweed-specific contaminant limits. Commission Regulation (EU) 2023/915, which took effect in April 2023 and repealed the earlier Regulation (EC) No 1881/2006, sets explicit maximum levels for heavy metals in seaweed-based food supplements (European Commission, 2023).
| Contaminant | EU limit (seaweed supplements) | Australian limit (seaweed) |
| --- | --- | --- |
| Cadmium | 3.0 mg/kg | No seaweed-specific limit |
| Lead | 3.0 mg/kg | No seaweed-specific limit |
| Mercury | 0.1 mg/kg | No seaweed-specific limit |
| Inorganic arsenic | ALARA principle (no numerical ML) | 1.0 mg/kg |
| Nickel | 30 mg/kg (40 mg/kg for wakame, from July 2025) | Not regulated |
> The EU requires food supplements consisting of at least 80% dried seaweed or seaweed-derived products to meet a 3.0 mg/kg maximum for cadmium.
> -- European Commission (2023), Regulation 2023/915.
Notably, Australia currently leads the EU on one point: it has a numerical maximum for inorganic arsenic in seaweed (1.0 mg/kg), whereas the EU applies the "As Low As Reasonably Achievable" (ALARA) principle for inorganic arsenic without a fixed ceiling (Pharos Project, 2024).
The EU has also issued Recommendation (EU) 2018/464 calling for member state monitoring of arsenic (total and inorganic), cadmium, iodine, lead, and mercury in seaweed and halophytes, generating the data needed to set future maximum levels (Eurofins, 2024).
## Codex Alimentarius: International standards in development
The Codex Alimentarius Commission, through its Committee on Contaminants in Food (CCCF), is the international body developing harmonised food contaminant guidelines. Australia participates in CCCF proceedings, meaning future Codex seaweed standards may influence FSANZ regulatory updates.
### Current status of seaweed work
As of CCCF18 (2025), there are no finalised Codex maximum levels for heavy metals specifically in seaweed. However, several work streams are active:
- An Electronic Working Group is refining **seaweed-specific annexes** within the Code of Practice for Prevention and Reduction of Cadmium Contamination in Foods (expanding from CXC 81-2022, originally focused on cocoa)
- CCCF19 is tentatively scheduled for October 2026, where further seaweed cadmium guidance is expected to be considered (National Law Review, 2025)
The absence of finalised Codex seaweed standards means Australia, like most nations, is operating without an international benchmark to adopt, making domestic testing and proactive supply chain management more important.
## Self-assessment: Is your sea moss adequately tested?
Whether you are a consumer evaluating a product or a small retailer assessing your compliance posture, this checklist maps the minimum regulatory requirements against best-practice testing.
### Compliance and testing checklist
| Question | Regulatory minimum | Best practice |
| --- | --- | --- |
| Is inorganic arsenic below 1.0 mg/kg? | Required (Schedule 19) | Required |
| Has arsenic speciation been performed (HPLC-ICP-MS)? | Not required by law | Strongly recommended -- total arsenic is misleading |
| Is lead tested and reported? | No seaweed-specific ML, but "safe and suitable" applies | Test per lot via ICP-MS |
| Is cadmium tested and reported? | No seaweed-specific ML, but "safe and suitable" applies | Test per lot via ICP-MS; benchmark against EU 3.0 mg/kg |
| Is mercury tested and reported? | No seaweed-specific ML, but "safe and suitable" applies | Test per lot via ICP-MS; benchmark against EU 0.1 mg/kg |
| Is iodine quantified per lot? | Not required under Standard 1.4.1 | Essential for consumer safety; report in mcg/g |
| Is a Certificate of Analysis (COA) published? | Not required by law | Recommended for consumer trust and due diligence |
| Is the species verified as *Chondrus crispus*? | General labelling accuracy required | DNA or morphological verification recommended |
For a detailed guide on interpreting each line of a COA, see [Reading a COA Line by Line](/blogs/learn/resources/reading-a-coa-line-by-line).
## Why third-party testing matters more than compliance
The gap between what Australian law explicitly requires for seaweed and what analytical chemistry can reveal about a batch of sea moss is substantial. A product can be legally compliant under Standard 1.4.1 (meeting the 1.0 mg/kg inorganic arsenic limit) while still containing elevated levels of lead, cadmium, or mercury that would fail under EU benchmarks.
This is why our supply chain uses per-lot ICP-MS testing for lead, cadmium, mercury, and total arsenic, plus HPLC-ICP-MS arsenic speciation to separate the toxic inorganic fraction from the relatively benign organic arsenosugars. We publish these results in our COAs because regulatory minimums alone do not tell the full safety story.
For a deeper look at why total arsenic numbers can be misleading and how speciation separates risk from noise, see [Arsenic Speciation Explained](/blogs/learn/science-safety/arsenic-speciation-explained).
## Conclusion
FSANZ Standard 1.4.1 and Schedule 19 provide a partial framework for heavy metal safety in seaweed sold in Australia. The 1.0 mg/kg maximum for inorganic arsenic in seaweed is a meaningful protection, and the Imported Food Inspection Scheme adds border screening for brown seaweed (iodine) and hijiki (arsenic). But the absence of seaweed-specific maximum levels for lead, cadmium, and mercury means the regulatory floor is lower than many consumers assume.
The general "safe and suitable" obligation is a legal backstop, not a testing protocol. It requires manufacturers to demonstrate safety but does not prescribe the analytical methods or thresholds to meet. For consumers, the practical protection comes from suppliers who voluntarily exceed compliance, publishing per-lot ICP-MS data, performing arsenic speciation, quantifying iodine, and benchmarking against EU limits even when Australian law does not yet require it.
Understanding what the law does and does not cover is the first step toward informed purchasing. The second step is knowing how to read the test results.
## Next step
[Learn how to read a Certificate of Analysis line by line](/blogs/learn/resources/reading-a-coa-line-by-line) so you can evaluate any sea moss supplier's testing claims against the regulatory benchmarks covered in this article.
---
*This article is for informational purposes only and does not constitute medical advice. Sea moss products are not intended to diagnose, treat, cure, or prevent any disease. If you have thyroid conditions, cardiovascular disease, are pregnant or breastfeeding, or take anticoagulant medications, consult your healthcare practitioner before consuming sea moss. Iodine intake from sea moss should be monitored against the tolerable upper intake level of 1,100 mcg/day for adults. SeaMossVibes tests each batch via ICP-MS and HPLC-ICP-MS arsenic speciation; COAs are available on request. Species identification should always be confirmed -- the commercial term "sea moss" encompasses multiple genera including Chondrus, Gracilaria, and Eucheuma, which differ in composition and safety profile. Sea moss contains iodine and other marine allergens; individuals with known seaweed or iodine allergies should avoid consumption.*
## References
- Dujardin, B., Ferreira de Sousa, R., & Gomez Ruiz, J. A. (2023). Dietary exposure to heavy metals and iodine intake via consumption of seaweeds and halophytes in the European population. *EFSA Journal*, 21(1), e07798. https://pmc.ncbi.nlm.nih.gov/articles/PMC9887633/
- Eurofins Scientific. (2024). EU Monitoring Recommendation for Metals and Iodine in Seaweed and Halophytes. https://www.eurofins.de/food-analysis/food-news/food-testing-news/metals-and-iodine-in-seaweed-and-halophytes/
- European Commission. (2023). Commission Regulation (EU) 2023/915 of 25 April 2023 on maximum levels for certain contaminants in food. *Official Journal of the European Union*. https://eur-lex.europa.eu/eli/reg/2023/915/oj/eng
- Food Standards Australia New Zealand. (2025a). Australia New Zealand Food Standards Code -- Schedule 19 -- Maximum levels of contaminants and natural toxicants. https://www.legislation.gov.au/Details/F2017C00333
- Food Standards Australia New Zealand. (2025b). Survey of inorganic arsenic in seaweed and seaweed-containing products available in Australia. https://www.foodstandards.gov.au/science-data/monitoring-safety/survey-of-inorganic-arsenic
- Food Standards Australia New Zealand. (2025c). Food Standards Code legislation. https://www.foodstandards.gov.au/food-standards-code/legislation
- Food Standards Australia New Zealand. (2025d). Imported foods. https://www.foodstandards.gov.au/consumer/imported-foods
- Food Standards Australia New Zealand. (2025e). Inorganic arsenic and iodine in seaweed. https://www.foodstandards.gov.au/consumer/prevention-of-foodborne-illness/arseniciodine
- National Law Review. (2025). 18th Session of the Codex Alimentarius Committee on Contaminants. https://natlawreview.com/article/codex-alimentarius-main-outcome-18th-committee-session-contaminants-food-cccf18
- Pharos Project. (2024). These New Rules Threaten Europe's Seaweed Producers. https://pharosproject.eu/blog/these-new-rules-threaten-europes-seaweed-producers/
Ready to start?
Turn what you learned into a daily ritual
Explore formats and product details, then check the physical label before use.
Explore products →
Listed ingredients · Storage guidance
